Indigresso Wiki

Open Source Stuff for DASH7

User Tools

Site Tools


opentag:board:haystack-saturn-i

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

opentag:board:haystack-saturn-i [2015/10/10 16:21]
jpnorair created
opentag:board:haystack-saturn-i [2015/10/10 16:28] (current)
jpnorair other info
Line 36: Line 36:
 ==== Battery Charging Shields ==== ==== Battery Charging Shields ====
 There is no battery charging capability in Saturn I, although you could a lithium-ion rechargeable battery pack shield to provide battery charging features. ​ Shields of this type will also supply power to the ESP-06 subsystem, because the Saturn treats it as Vin, so make sure to spec a large enough Li-Ion battery to provide the necessary current. ​ As a rule of thumb, don't use less than 1000mAh for such a design. ​ There is no battery charging capability in Saturn I, although you could a lithium-ion rechargeable battery pack shield to provide battery charging features. ​ Shields of this type will also supply power to the ESP-06 subsystem, because the Saturn treats it as Vin, so make sure to spec a large enough Li-Ion battery to provide the necessary current. ​ As a rule of thumb, don't use less than 1000mAh for such a design. ​
 +
 +===== Other Information =====
 +"​Saturn-I"​ is the first board in the Saturn series. ​ All Saturn boards will feature STM32 MCUs and have the same Arduino-like form factor. ​ It is named "​Saturn"​ after the Roman deity, because STMicro engineering is mainly in Grenoble, France and various parts of Italy (at least Milan and Catania). ​ All of these places were important areas of the Roman Empire.  ​
  
opentag/board/haystack-saturn-i.1444512082.txt.gz ยท Last modified: 2015/10/10 16:21 by jpnorair