Indigresso Wiki

Open Source Stuff for DASH7

User Tools

Site Tools


opentag:board:main

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
opentag:board:main [2013/06/24 09:57]
jpnorair [CC430 Boards]
opentag:board:main [2015/10/10 15:25] (current)
jpnorair [STM32 Boards]
Line 31: Line 31:
  
 ^ Board         ^ Status ​  ^ Name/​Link ​                      ^ STM32 Variant ​  ^ Radio     ^ Features ​           ^ ^ Board         ^ Status ​  ^ Name/​Link ​                      ^ STM32 Variant ​  ^ Radio     ^ Features ​           ^
-| [[Haystack-I|Haystack Jupiter]] ​ | Sampling ​ | Haystack Dev Kit  | STM32L151C8 ​ | SPIRIT1 ​ | 10KB SRAM, 64KB Flash, 4KB EEPROM, integrated USB, Arduino "​Half-Shield"​ form factor |+| [[Haystack-I|Haystack Jupiter]] ​ | Inactive ​ | Haystack Dev Kit  | STM32L151C8 ​ | SPIRIT1 ​ | 10KB SRAM, 64KB Flash, 4KB EEPROM, integrated USB, Arduino "​Half-Shield" ​form factor | 
 +| [[Haystack-Saturn-I|Haystack Saturn I]]  | OSH  | Saturn I Board  | STM32L151CC ​ | SPIRIT1 ​ | 32KB SRAM, 256KB Flash, 8KB EEPROM, integrated USB, Arduino ​form factor |
 | [[OpenNode-433|OpenNode-433]] ​ | Sampling ​ | OpenNode 433 MHz kit   | STM32F103CB ​  | CC1101 ​ | 20KB SRAM, 128KB Flash, Onboard-Sensors,​ TelosB form-factor ​ | | [[OpenNode-433|OpenNode-433]] ​ | Sampling ​ | OpenNode 433 MHz kit   | STM32F103CB ​  | CC1101 ​ | 20KB SRAM, 128KB Flash, Onboard-Sensors,​ TelosB form-factor ​ |
 | [[DK7A433|DK7A433]] ​      | Active ​  | Semtech SX1212 DASH7 dev kit    | STM32L151CBT6 ​  | SX1212 ​   | 16KB SRAM, 128KB Flash, integrated USB, 2 LED, integrated antenna ​ | | [[DK7A433|DK7A433]] ​      | Active ​  | Semtech SX1212 DASH7 dev kit    | STM32L151CBT6 ​  | SX1212 ​   | 16KB SRAM, 128KB Flash, integrated USB, 2 LED, integrated antenna ​ |
 | [[MLX_Proto_E|MLX_Proto_E]] ​  | Inactive ​  | MLX73-series Prototype dev kit  | STM32F103ZGT6 ​  | MLX73xxx ​ | STM3210E-EVAL kit + MLX73-series eval daughterboard ​  | | [[MLX_Proto_E|MLX_Proto_E]] ​  | Inactive ​  | MLX73-series Prototype dev kit  | STM32F103ZGT6 ​  | MLX73xxx ​ | STM3210E-EVAL kit + MLX73-series eval daughterboard ​  |
- 
 ===== Selecting a Board for Your Application ===== ===== Selecting a Board for Your Application =====
 Assuming that the board you want to use has a board configuration header file (see below), you can include the board header you want to use in ''/​Apps/​YOUR_APP/​Code/​platform_config.h''​. ​ Some of the demo apps included with OpenTag already support several boards, and you can just pick one of them.  If your board is not listed, then make sure all other board configuration headers are commented out and add the following line to platform_config.h:​ Assuming that the board you want to use has a board configuration header file (see below), you can include the board header you want to use in ''/​Apps/​YOUR_APP/​Code/​platform_config.h''​. ​ Some of the demo apps included with OpenTag already support several boards, and you can just pick one of them.  If your board is not listed, then make sure all other board configuration headers are commented out and add the following line to platform_config.h:​
opentag/board/main.txt · Last modified: 2015/10/10 15:25 by jpnorair